60m
Response
5★
Rated
SG
Islandwide
Your call matters — anytime, anywhere. Our specialized team is ready to handle your emergency or repair needs immediately across all Singapore districts.
No Waiting Time · Islandwide Coverage · Licensed Pros
Need a masonry contractor in Singapore for new wall construction, blockwork, brickwork or repairs? First Service Renovation provides masonry construction works for residential and commercial properties across Singapore.
Our scope includes new masonry walls, brick and block installation, damaged wall repairs, plastering, rendering, reinstatement and other renovation-related wet works. We work on HDB flats, condominiums, landed homes, offices, retail spaces and other commercial premises.
The right approach depends on more than the size of the wall. Property type, existing wall condition, material choice, door or window openings, finishing requirements and renovation restrictions can all affect the work. For projects involving existing walls or layout changes, the proposed scope should be checked before work begins.
Masonry work covers several stages of wall construction and repair. Some customers need a complete new wall, while others only need a damaged section repaired or a surface prepared for painting or tiling.
Our masonry services can include:
New brick and block wall construction
Hollow block and concrete block installation
Internal partition wall construction
Brick wall installation and repair
Damaged masonry repair
Wall reinstatement after renovation work
Plastering and rendering
Cement and mortar works
Making good around openings and altered areas
Wet-area masonry and kerb works where applicable
The exact scope is determined by the condition of the site and the intended use of the wall.
For more specialised work, customers can also explore our block installation services, concrete block installation, brick wall installation, partition block works and wall reinforcement solutions.
There is no single masonry material that suits every renovation.
Hollow blocks are commonly used for internal non-load-bearing walls and partitions. They are useful when a project requires a defined room, enclosure or new internal layout without unnecessarily heavy construction.The required block thickness and construction details depend on the property and proposed application.
Concrete or cement blocks may be suitable for projects requiring durable block construction. The wall needs proper setting out, alignment, mortar joints and finishing so that the completed surface is ready for the next stage of work.
Customers planning a dedicated block wall can view our concrete block installation and cement block installation services for more specific information.
Brick can be used for selected wall construction, repair and reinstatement projects. Existing brickwork may also need attention when joints deteriorate, sections become damaged or renovation work affects part of the wall.
For projects focused specifically on brick construction, our brick wall installation service provides more detail.
A masonry wall normally needs more than blocks and mortar. Plastering or rendering creates a more even surface and prepares the wall for paint, tiles or other finishes.
The required finish should be considered at the start of the project rather than treated as a separate issue after the wall has been built.
Masonry requirements change depending on the property.
HDB Masonry Works :
HDB masonry projects may include internal hollow-block walls, repairs, wall reinstatement, plastering and renovation-related blockwork.
Before altering an existing wall, it is important to identify the type of wall and check the applicable HDB requirements. Wall demolition or alteration should not begin simply because a wall appears to be non-load-bearing.
Condominium Masonry Works :
Condominium renovations may require new internal walls, damaged wall repairs, wet-area masonry or changes connected with a wider renovation.
Management or MCST renovation requirements may also apply. These should be checked before work starts, particularly where hacking, access, working hours or debris removal are involved.
Landed homes may require masonry during extensions, internal renovation, wall repairs or changes to an existing layout.
Site conditions vary considerably between properties, so existing construction and the proposed work need to be assessed before deciding on materials and execution.
For offices, retail units and other commercial premises, masonry may be needed for partitions, back-of-house areas, wall reinstatement, repairs or renovation works.
Commercial projects may also need to coordinate masonry with electrical, plumbing, waterproofing, tiling and other trades. Planning these stages in the correct order helps avoid reopening finished walls later.
HDB renovation requirements depend on what is being built, altered or removed.
Under current HDB renovation guidelines , erection of a 63mm thick hollow-block wall can fall under works that do not require a renovation permit when the stated conditions are met. Conditions include matters such as lighting, ventilation, escape routes and the provision of an RC lintel across openings where required.
The position is different when an existing wall is being demolished or altered. Demolition or alteration of internal non-structural hollow-block or brick walls requires HDB approval. HDB also sets requirements for certain wall finishes and plastering work.
Because the rules depend on the actual scope, customers should confirm the latest HDB requirements before construction begins. A proposed new partition should not automatically be treated in the same way as hacking or modifying an existing wall.
If your masonry project forms part of a larger renovation, tell us what you intend to change so the masonry scope can be considered together with the surrounding work safely.
Not every masonry problem requires a completely new wall.Existing walls can deteriorate because of previous renovation work, moisture, movement, damaged plaster, poor repairs or wear over time.
Common issues include cracked wall surfaces, damaged brick or block sections, loose or deteriorated plaster, uneven surfaces, damaged mortar joints, openings that need making good and walls affected by previous hacking or renovation.
A visible crack alone does not show what caused it. The affected area and surrounding construction should be checked before choosing a repair method.
Where a crack or defect appears to involve structural concrete rather than normal masonry or plaster, it should be treated differently from a routine cosmetic wall repair.
Understand the Required Work :
We first establish what needs to be built, repaired or reinstated. This includes the wall location, approximate dimensions, property type and required finish.
Check Existing Site Conditions :
For renovation projects, existing walls, floors, openings and nearby services may affect how the work can be carried out.
This stage is particularly important when masonry is connected with hacking, plumbing, electrical work, waterproofing or an existing door opening.
Confirm the Masonry Scope :
The wall type, material, thickness, openings and finishing requirements are considered before construction.
Where approvals or property-specific renovation rules apply, these should be resolved before the relevant work begins.
Carry Out the Masonry Work :
The work may involve setting out, laying blocks or bricks, forming the required openings, mortar work and making good adjoining areas.
Alignment and preparation matter because problems at this stage can affect plastering, tiling, carpentry and other finishes later.
Plaster, Render or Prepare the Surface :
Depending on the project, the completed masonry may be plastered, rendered or otherwise prepared for the final wall finish.
Check the Completed Area :
The finished work should be checked against the agreed scope before subsequent trades or decorative finishes continue.
Masonry quotations vary because two walls of similar size can require very different amounts of work.
The main factors include wall dimensions, brick or block type, wall thickness, existing site condition, access, demolition or removal work, number of openings, plastering requirements, finishing, debris handling and coordination with other renovation trades.
A small repair may require careful preparation but little new material. A new wall may use more material but be easier to execute in an open renovation site. This is why an accurate quotation should be based on the actual scope rather than a generic per-wall figure.
Photos and basic measurements can help with an initial discussion. A site assessment may be more appropriate when the existing condition or required work cannot be determined clearly from photographs.
Masonry rarely sits completely on its own during a renovation.
If a wall will contain electrical points, plumbing routes or other services, these requirements should be considered before the wall reaches its final finish. Wet-area masonry may also need coordination with waterproofing and tiling.
For larger projects, masonry can be planned together with full house renovation, concrete hacking and reinforcement, waterproofing, electrical, plumbing and floor tiling work.
Getting the sequence right reduces unnecessary hacking and repeated repair after a wall has already been plastered or finished.
First Service Renovation provides masonry and related renovation services for residential and commercial properties across Singapore.
Rather than treating every enquiry as the same type of blockwork, we look at the proposed wall, existing condition, property type and related renovation requirements before defining the scope.
This is particularly useful when masonry is only one part of a larger project involving hacking, waterproofing, plumbing, tiling or other construction work.
Clear scope also makes quotations easier to understand. Customers should know whether the proposed work includes wall construction only or also covers removal, plastering, reinstatement and finishing.
For work where dimensions or site conditions need to be checked, contact us to discuss a site assessment.
We handle masonry enquiries across Singapore for HDB flats, condominiums, landed properties and commercial spaces.
The location of the property can affect access, working arrangements and building management requirements, but the first step remains the same: establish what wall work is required and check the existing conditions before deciding how the job should proceed.
If you are planning a new block wall, repairing damaged masonry or reinstating an area after renovation, send us the project details, photos and location for an initial review.
Ans: We provide masonry construction and repair services including brickwork, blockwork, new wall construction, damaged wall repair, plastering, rendering, reinstatement and renovation-related wet works. The exact scope depends on the property and proposed work.
Ans: It depends on the work. Under current HDB guidelines, erection of certain 63mm hollow-block walls can be carried out without a renovation permit when the applicable conditions are met. Demolition or alteration of existing internal non-structural hollow-block or brick walls requires HDB approval. Always check the latest requirements for the proposed work.
Ans: New masonry walls may be possible depending on the property, proposed location, wall type and applicable renovation requirements. The intended layout and building rules should be checked before construction begins.
Ans: Many localised masonry problems can be repaired without rebuilding an entire wall. The right method depends on whether the damage affects plaster, mortar, individual blocks or bricks, or another part of the construction. The cause should be checked first, especially when significant cracking is present.
Ans: Plastering and rendering can form part of the masonry scope when required. The final specification should make clear whether the quotation covers wall construction only or also includes plastering, making good and preparation for paint or tiles.
Ans: The cost depends on wall size, material, access, existing condition, demolition requirements, openings, plastering, finishing and related renovation work. Providing photos, dimensions and the project location can help define the scope before a quotation is prepared.
Ans: Send the property type, location, photos of the existing area, approximate wall dimensions and a short explanation of what you want to build, remove or repair. Include information about door or window openings and the required finish if you already know them.
Planning a new brick or block wall, repairing damaged masonry or reinstating a wall after renovation?
Contact First Service Renovation with your property type, location, photos and project requirements. We can review the proposed scope and advise on the next step for your masonry construction works in Singapore.
